Automobile Touch Up Paint

Your vehicle means a lot to you, irrespective of its cost, size, make, and how new or old it is. A small scratch over it makes you feel very bad. But, what after such a scratch? Of course, you will not prefer keeping it in the same damaged condition and feel sad every time you look at it. Then, why not go for an automobile touch-up paint and bring back the charm of your vehicle.

Scratches and dents are inevitable, even if you drive with optimum care. Such scratches, however small they might be, tend to spoil the looks of your awesome car. Moreover, this damaged area also becomes susceptible to rust, worsening the appearance further. Hence, it is always good to fix the problem immediately to prevent any further damage. Touch up paint is the right tonic for making your vehicle as beautiful as before in less time and cost. All you need to do is pick up a color that matches to that of your vehicle. The process involves many other things, and it needs to be carried out very carefully to have a maximum natural effect and retain the original looks of your vehicle. The procedure involves the following:

Masking Tape

It protects the surfaces adjacent to the damaged area from the touch up process. A good-quality masking tape will stick properly, and can be peeled off easily without leaving any residue or damaging the color of your vehicle.

Masking Film/Paper

It blocks the adjacent panels from over spray. Do not use the masking film on the panel directly; this may lead to a visible tape line after its removal. Make a line with the masking tape first, and then, tape the masking film on the existing tape.

High-grit Sandpaper

This is the basic thing required to clean the damaged surface. The scratched area is much prone to rust. In such a case, use a higher-grit sandpaper and clean the rust.

Primer

It is applied directly to the bare metal to form a perfect surface to paint over. Applying a primer is a must in this process, because its bonding and filling properties make the damaged surface even and hence, suitable to be painted.

Base Coat

This is the actual paint, same as the color of the vehicle. While you purchase the color, you need to check whether it is metallic or acrylic, and what is the make and model of the vehicle you plan to paint.

Clear Coat

As the name suggests, it is a clear, transparent, and shiny paint. This protects the vehicle from UV rays and gives a classic shine to the colored surface.

The touch up paint comes in various forms. It is available as the one to be applied with a brush. It also comes in the form of an aerosol spray, in which the paint is sealed in a pressurized container and is released in a fine mist, when the button of the spray bottle is pushed. It also comes as a paint pen, which you can use directly on the surface.

Here is the procedure for repairing the scratches on your vehicle with it:

  • Find the right automotive paint for your vehicle. While applying it on your car, remember to first test the color on a hidden area. Once the color is applied on the car, you cannot change it.
  • Give your car a thorough wash and dry it off completely. If you cannot have a complete car wash, clean the scratched area with a cloth dipped in the solution of mild soap and water.
  • Take prep solvent and a soft towel. Take the needed amount of prep solvent on the towel, and use it to clean the grease, wax, oil, and other surface contaminants.
  • Sand the problem area with a high-grit sandpaper.
  • Apply 2 – 3 coats of the primer over the bare metal. Keep a gap of 5 – 10 minutes between each coat. If you want to blend the primer, use a wet sandpaper over this area after 20 minutes.
  • Apply a base coat. Apply as many coats as required to cover the damaged area. Keep a gap of 5 – 10 minutes between each coat. Remember to paint two inches widthwise and lengthwise around the damaged area. Never use a wet sandpaper or prep solvent in between coats of the touch up paint.
  • Wait for 20 minutes after the application of the last layer of the base coat is over. Then, start applying clear coat.
  • You can apply 2 – 3 layers, but keep a gap of 10 – 20 minutes while applying each layer.
  • If this paint is not glossy enough, use a hair dryer to heat the area and have a smooth and shiny surface.

Alternatives

For minor scratches on the car body, you can use a scratch remover, car wax, or a polishing compound.

Scratch Remover

  • If the scratches are not very deep, they can be removed easily by just applying this remover.
  • Use a cloth terry towel and apply the scratch remover in a circular motion over the scratch.
  • The scratch will be removed after a few applications.

Car Wax
Waxing the car gives an ultimate shine to it. It forms a thin, transparent film over the car paint, which covers minor scratches, stone chips, prevents rusting of the surface, and protects it from the harsh environment.

  • First, clean the car thoroughly and dry it.
  • A quality wax with no abrasives, a soft sponge, and a clean, soft cloth towel are all that you require to wax the car.
  • It is better to park the car in a shade and start working on one section at a time.
  • Apply the wax with a sponge and wait for 5 minutes.
  • Now, use a clean and soft towel and buff the wax in circular motion.
  • Once you are done with the whole car, clean the unpainted areas of the vehicle.
  • For best results, wax the car every 3 – 4 months.

Polishing Compound

Removing fine scratches on the glass of the car is not a big task.

  • Go for a polishing compound that contains the finest abrasive.
  • Take a little amount of this compound on a sponge, and apply it over the scratches in a circular motion until they
  • become less visible.
  • Don’t overdo.
  • Now, wash off the area properly.
  • Use wax over it as per the aforementioned instructions.

Custom Car Interior Ideas

There are several car owners who prefer to modify their wheels and have them made into custom designs. A custom car is basically a modified car that has been altered in such a manner that it gives better performance. In some cases, the vehicle is modified only in its appearance. In both ways, the automobile needs a lot of changes, and the interiors should never be ignored.

In case of you are planning to transform your vehicle in custom designs, there are some aspects of the interior that you will need to change, and in many cases, also replace.

Interior Design Ideas
While modifying the normal car to turn it into a custom car, mechanics and engineers often concentrate on two aspects: the performance and the looks. While modifying the performance, the engine, gear box, chassis, and some of the other performance-related parts such as the suspension are either altered or replaced. The exterior paint, seats, interior looks, and external electronics are also some aspects that are looked at.

Racing Seats
The racing seats are an important aspect of the design. These seats are usually more secure and are manufactured according to the standards of racing cars. If only the looks are altered, then such a set of seats merely become dashing style statements. Not to mention, they do look awesome. However, when the performance and specifications of the engines are changed, such auto parts are fitted to increase the safety.

Lambo Doors
One can always argue that this is an external modification, but Lambo doors should never be left out as they are a part of the interiors too. Normally the car doors open in a horizontal motion. Lambo doors, on the other hand open in an upward motion, something a tall person can operate.

Shift Knobs
Not all people who are modifying their cars are fond of original shift knobs that are fitted by the manufacturers. There are quite a few varieties of knobs that are available in the market. Usually, once the shift knobs are replaced, so are the hand brake knobs and foot pedals.

Lighting
Lighting the interiors aesthetically is an important aspect of modifying a car. In such a situation, the light scheme is modified according to the colors of the new modifications.

Carpets and Covers
The carpets and covers are also often modified while altering the looks of the car. It is a convention to choose the carpets and covers in a correlated color scheme. Black colored carpets and blue-cum-black seat covers, is a popular combination.

There are endless ideas that one can employ while modifying and altering a car. There are also countless parts that can be replaced with more stylish ones.

Tips to Remove Spray Paint From Your Car

One of the best ways to make your car look cool is to get it spray painted, as a smiley or motto displayed in bright colors certainly makes a car look young. However, this look is preferred only by teenagers and youth in their 20s. For others, a spray painted car is a cruel trick played on them by kids. These people can obviously not roam around with their car looking thus. Following are some easy ways to remove graffiti or any kind of spray paint from you car’s exterior.

Water and Soap
Though this may seem like a very obvious method of removing spray paint, it does work. All you need for this method is a bucket of hot water and a mild detergent. Simply scrub the paint with the help of a cloth. This solution will definitely help remove the paint, unless you allow it to dry up and then try to remove it. Just like any other stains, a spray paint stain also needs to be attended immediately.

Nail Polish Remover
It might sound weird that the use of nail polish remover can help in getting rid of spray paint from a car, but it is true, as a remover contains acetone in it, which helps to remove the stubborn paint. Simply dip a soft cloth into the nail polish remover and lightly rub it on the spray paint. Though this is a simple procedure, do it slowly so as not to remove the original car paint. Once the spray paint is removed, splash water on that spot and rub it with a dry cloth. One of the most important things to keep in mind is to keep the nail polish remover away from rubber ends of the car, as acetone can dissolve rubber in a minute.

Petrol
Petrol or gasoline can also be used for removing spray paint from car. The procedure is simple; dip a soft cloth in a petrol container and gently rub it on the painted area. Be careful though, as the petrol can remove the original paint of the car too. Afterwards, wash the car with lukewarm water. You might need to add detergent to the water to get rid of the smell. Also wax the car as it will be easier to remove the paint if it gets spray painted again.

Rubbing Compound
Rubbing compound can also be used for removing the spray paint. If you are wondering as to where you can get this chemical, you need not worry as it is available at any auto parts store. Just like all the previous methods, use a cloth to rub the rubbing compound on the spray paint. Apply it evenly and then rub off vigorously. Microfiber cloth is more useful in this task, which is also available in auto part stores.

These were some easy methods to remove spray paint from cars. All these methods are safe to use, however, it is better to try each solution on a small patch first. If the original paint also comes off, do not use it. So, now that you know the easy ways to get rid of spray paint, you do not need to worry about the unwanted designs on your car.

Tips to Paint Flames

While there are a lot of designs that you might find while trying to glamorize your vehicle, one of the best option is flames. These instantly convert a simple looking vehicle into a hot piece to drive. You can get the flames painted from a professional. But believe me, you can do this job on your own as well. All you need to do is collect the material required and start the job. You can follow the same procedure for any vehicle, guitar, or anything else. The type of colors will vary depending on the surface over which you want to paint the flames.

Things You’ll Need

  • Flame template or Poster board to make a template
  • Spray gun
  • Airbrush
  • Car paint (Red, yellow, orange)
  • Masking tape
  • Masking Film
  • Adhesive tape
  • Cotton rags
  • Scouring pad

Procedure

Step 1: You can get a ready-made template of fire flames from a craft store. Else, you can draw a freehand sketch of the flames too. Decide the area on your car where you need the flames. Consider this area while you make a template. You can also do this to scale; using a graph paper is a great idea. It will help you know where exactly the curves and lines of the flames will fall on your car.

Step 2: Expand the graph on a full-size poster board and create a bigger template of the flames. Cut out the template. You can have many such to be placed side-by-side.

Step 3: Take these templates and tape them over the car surface. The best places to have flames is from the bottom, flames rising upwards towards the windows. Tribal flames are commonly placed horizontal, from the front doors going in the rear direction. Some love to have them on the bonnet as well. Tape the templates accordingly onto your car body.

Step 4: Once you have finished masking the flame templates, using a masking tape, mask off the area around the templates thoroughly. A good quality masking tape will ensure easy removal. Make sure you cover the car panels with a masking film. Do not stick the masking film directly, as it might leave a tape line when removed. First stick a masking tape as a border and stick masking film over it. This will ensure that the paint doesn’t get sprayed over the rest of the car surface and car parts, like the wind shields, chrome, mirrors, and tires.

Step 5: Remove the flame templates. You can touch up the masked-off areas with more masking tape carefully, maintaining the flame border lines and curves.

Step 6: Take a small scouring pad and rub out the area to be painted. Now, clean the entire area using rags. Apply a primer over the area to be painted. Let it dry before you start painting the flames.

Step 7: Take the yellow paint in your spray gun. Apply a few thin layers to cover up the area. The base is formed, let it dry. Now, you have to do some detailing. Add orange paint in the airbrush. From a little distance from the base of the flames, start spraying orange paint, only in the center. Maintain the curves while spraying. Load red paint in the airbrush and spray it to have perfect highlights. Use red for the upper border and flame tips. You can use colors according to your own ideas as well.

The hot flames are right there, on your car!